Rapid Search

Find SPIROL products fast.

Optimal Application Engineering

Design the most cost effective fastening solution.

Your Location

For best online service, please change location if not correct.

Your Language

Please select your preferred language.

SPIROL Introduces Split Seam Extra Clearance Compression Limiters

SPIROL is pleased to introduce the new CL220 Split Seam – Extra Clearance Compression Limiter to their expansive product offering.  This post-mold installed Compression Limiter has a flexible diameter to accommodate wide hole tolerances, while the seam is designed to prevent interlocking in the free state.  The spring force generated during installation provides self-retention of the Limiter within the plastic assembly.  Once installed, the CL220 provides a minimum clearance of 1mm over the bolt diameter; 0.5mm greater clearance than that provided by SPIROL’s CL200 Split Seam Compression Limiter.  The larger inner diameter (ID) also accommodates the protective coating of ArmorGalv®, a zinc alloy thermal diffusion coating that provides up to 1000+ hours of salt spray protection for highly corrosive applications such as marine, automotive, mining and industrial manufacturing.  The benefits of ArmorGalv® include no insignificant surfaces on the Limiter and that the entire ID receives full coating and protection. 

Here is a link to the new CL220 Split Seam – Extra Clearance Compression Limiter specifications.  

SPIROL offers a variety of formed and machined Compression Limiters to accommodate different compressive loads, positional tolerances and installation methods.  Standard formed Compression Limiters include: Series CL200 Split Seam, CL220 Split Seam – Extra Clearance, CL350 Split Seam – Heavy Wall, CL400 Split Seam - Oval, CL460 Molded-In - Oval and the Series CL500 Molded-In designs.  Standard machined options include: CL600 Aluminum and CL601 Headed Aluminum Compression Limiters, and the CL800 Brass and CL801 Headed Brass Compression Limiters.

Download the latest SPIROL Compression Limiters Design Guide for information about selecting the best Compression Limiter for your assembly!

Complimentary Applications Engineering Support:  SPIROL Engineers will review your application requirements and work with your design team to recommend the best solution at the lowest total assembly cost.  It all starts with our Optimal Application Engineering process. To start, please select Compression Limiters under the Optimal Application Engineering portal on the left hand side of this page, or contact us directly at any one of SPIROL’s global locations

# # #

SPIROL INTERNATIONAL CORPORATION is a leading manufacturer of a diverse line of engineered components for fastening, joining and assembly including: Coiled Spring Pins, Slotted Spring Pins, Solid Pins, Disc Springs, Alignment Dowels and Bushings, Spacers, Compression Limiters, Threaded Inserts for Plastics, Precision Shims, Pin and Insert Installation equipment. SPIROL can be found on 4 continents within the following 12 countries: Brazil, Canada, China, Czech Republic, England, France, Germany, Mexico, Poland, South Korea, Spain, and the United States. Since 1948, SPIROL has been providing technical expertise in fastening, joining and assembly to the world's leading manufacturers.

Involve SPIROL Engineering early in the design stage of your next project!