Spring Alignment Dowels
SPIROL’s Dowel Bushings and Spring Dowels are designed to maintain alignment and are used to locate components with respect to each other. These roll-formed, hollow Alignment Dowels have lead-in chamfers that facilitate insertion into the holes of both mating components. The Dowel's flexibility enables absorption of wide hole tolerances and the staggered seam prevents interlocking.
Dowel Bushings are designed with an inside diameter clearance that allows the passage of a bolt for fastening, thereby eliminating the need to drill an additional hole. They are also heat treated to isolate the bolt from shear loads.
Spring Dowels are designed around the holes in the mating components and are not used in conjunction with bolts.
SPIROL’s Dowel Bushings and Spring Dowels simplify assembly, reduce weight and significantly lower costs.
If installation equipment is required, SPIROL also offers a standard comprehensive line of Installation Equipment from manual to fully automatic modules, with or without out fixturing, to support your assembly requirements.
Application Engineering Assistance: If you would like assistance in selecting the proper Alignment Dowel for your assembly, please Request Engineering Support! We are here to help!
SPIROL Series DB100 Dowel Bushings are used to align or locate components in conjunction with bolts which pass through the inside diameter of the Dowel Bushing after it has been installed. The flexible diameter absorbs wide hole tolerances, and the need for two separate holes (one for the location / alignment Dowel and one for the bolt) is eliminated. The hardened Dowel Bushings also absorb shear loads, isolating the bolts from these forces. DB100 Dowel Bushings accommodate metric bolt sizes ranging from M6 to M16 and .250” to .500”.
SPIROL Series SD200 Spring Dowels are used to accurately locate components with respect to each other. They are formed around arbors to assure roundness. It is recommended that one half of the hole tolerance be used for the fixed location of the Spring Dowel and one half for the hole in the mating part. Spring Dowels are designed for metric holes that range in diameter from M6 to M16 and available to order for inch holes ranging from .250” to .625”.
Additional Alignment Dowels / Bushings Types
If you are unable to find the Alignment Dowel in the diameter, length, material, finish or quantity that you require within our standard offering, or if you are unsure what Alignment Dowel is most appropriate for your plastic assembly, Request Engineering Support and we will help you determine the most cost-effective solution for your application.
Installation Technology for Dowels and Bushings
In addition to a comprehensive line of engineered components used for joining and assembly, SPIROL also offers a full range of installation equipment designed to facilitate cost-effective and high quality assembly of your products. Our installation solutions range from manual machines to fully automated work cells with statistical process control and error-proofing options. We are the only company of our kind that offers the total integrated solution.
Local Design, Global Supply.
SPIROL has Application Engineers throughout the world to assist you in your designs, supported by state-of-the-art manufacturing centers and worldwide stocking facilities to simplify the logistics of delivering your product.
Have a manufacturing issue you can't solve? Our engineering experts love a challenge. Recommending efficient solutions for your application requirements is what we do best. Give us a call or fill out the form below to connect with us!+1 860 774 8571